Formlabs Tough 2000 Resin Cartridge

Formlabs Tough 2000 Resin Cartridge

Simulates the strength and stiffness of ABS Compatible with Form 2 and Form 3/3B

$175.00

FREE Standard Shipping

Tough 2000 Resin for Rugged Prototyping

Tough 2000 Resin is the strongest and stiffest material in our functional family of Tough and Durable Resins. Choose Tough 2000 Resin for prototyping strong and sturdy parts that should not bend easily.

Tough 2000 Resin is ideal for:

  • Strong and stiff prototypes
  • Jigs and fixtures requiring minimal deflection
  • Simulating the strength and stiffness of ABS

Technical data:

Due to its high strength and modulus, Tough 2000 Resin can handle higher stress and will hold its shape better under load compared to Tough 1500 or Durable Resins. When pushed to its stress limit, Tough 2000 parts will bend significantly before ultimately breaking.

Features

Tough 2000 Resin is a reformulation of Formlabs' popular Tough Resin, offering more advanced mechanical properties and a new dark grey look. Compared to Tough Resin, this material reformulation brings:

  • Reduced brittle failures: Increased elongation by more than 100%.
  • Improved strength and stiffness: Increased flexural strength and flexural modulus by roughly 15%.
  • Better performance at elevated temperatures: Increased heat deflection temperature by roughly 25%.
  • Professional-looking parts: New grey color.

With this reformulation, Formlabs' simultaneously improved elongation, strength, and stiffness, which are typically competing mechanical properties.

Note that Tough 2000 Resin requires Formlabs specialty resin tanks, Form 2 LT Tank or Form 3 Tank v2.

Specifications

Model RS-F2-TO20-01
Manufacturer Formlabs

 

Printer Compatibility Form 1+, Form 2, Form 3/3B
Resin Tank Compatibility Form 2 LT, Form 3 V2
Recommended Lifetime 24 months

 

Layer Thickness (Microns)
Form 1+ 100, 50
Form 2 100, 50
Form 3 100, 50

 

Form Wash Settings 10 + 10 min (Wash for 10 minutes on the build platform. Remove parts from the build platform, then wash for 10 more minutes using fresh IPA.) Tackiness has been observed on part surfaces when washed in alcohol with more than 5% resin concentration.
Form Cure Settings 60 minutes at 70° C

 

 

Comparison With Other Materials 

  ABS Plastic Formlabs Tough TOTL05 Formlabs Tough 2000 Resin Formlabs Standard Resins (Post-Cured)
Tensile Modulus (GPa) 2.5 2.7 2.2 2.8
Elongation at Break (%) 18.0 24.0 48.0 6.2
Notched IZOD Impact Strength (J/m) 234.9 38 40 25
Heat Deflection Temperature (HDT) @ 1.8 MPa 93 43 53 58

 

Compatible Products