Ultimaker PVA natural small 2.85mm (0.35kg)
Ultimaker PVA Natural 2.85mm (0.35kg)
SUP-9732 Water soluble support
Ultimaker filaments are formulated to ensure the highest print quality and cover a wide range of applications. Enjoy a seamless 3D printing experience with our optimized, preconfigured Cura profiles or easily customize them for your needs.
RELIABLE 3D PRINTING WITH OPTIMIZED PRINT QUALITY
We’ve developed Cura profiles specifically tailored for our materials with care and a lot of work, so that you can reliably print with an optimized quality. When you’re ready to get started, all you need to do is click print for a seamless experience.
Good adhesion for PLA and Nylon. Good thermal stability resulting in better degradation resistance compared to other PVA filaments; less moisture sensitive than other PVA.
Safe dissolution in tap water (no chemicals required). Biodegradable with no hazardous by products.
Ideal for printing complex models with large overhangs, deep internal cavities, and intricate geometries.
Complex models that require supports for large overhangs, deep internal cavities, and intricate geometries.
- Moisture, humidity
- Ideal for printing complex models with large overhangs, deep internal cavities, and intricate geometries.
- Ultimaker 3
- Ultimaker 3 Extended
- Product should be stored in a dry (< 50% relative humidity) and cool place at temperatures between 0*C to +30*C. Avoid direct sunlight. Minimize moisture uptake by leaving it in a sealed package with the supplied desiccant. Keep away from oxidizing agents and strongly acid or alkaline materials. Keep away from food, drink, and animal feeding stuffs.