Formlabs Fuse Blast
$10,999.00
Achieve professional, consistent parts that are clean to the touch faster and easier than ever before with Formlabs Fuse Blast, an easy-to-use, fully automated cleaning and polishing solution for post-processing SLS 3D printed parts.
Fuse Blast seamlessly integrates into the Fuse Series ecosystem and streamlines your post-processing workflow, empowering you to fully clean a whole build chamber of printed parts within 30 minutes and drastically reducing labor time and cost. With the optional Polishing System, Fuse Blast takes your parts to another level by polishing them to a smooth, semi-gloss, and dye-ready surface finish, to deliver consistent, professional-grade results every time.
Fuse Blast seamlessly integrates into the Fuse Series ecosystem and streamlines your post-processing workflow, empowering you to fully clean a whole build chamber of printed parts within 30 minutes and drastically reducing labor time and cost. With the optional Polishing System, Fuse Blast takes your parts to another level by polishing them to a smooth, semi-gloss, and dye-ready surface finish, to deliver consistent, professional-grade results every time.
Ask our Experts
Features
Automatic Tumbling
How it works:
Put roughly depowdered parts into the tumbling basket and set a cleaning routine or pick your own settings.
A combination of basket rotation, compressed air, and abrasive media quickly removes semi-sintered and loose powder.
Pick up your parts 10-15 mins laters. Voila!
In-line Ionizer
What is it?
Neutralizes charged parts, releasing surface dust and media residue.
Prevents dust from re-settling on the parts.
Quiet, Contained Operation
What is it?
Fully sealed machine with negative air pressure ensures all powder is contained inside the media blaster
HEPA Filter controls air quality
<70 DB for quiet operation
Why it's important
Can be placed next to Fuse and Sift and other machinery - no separate room required.
Fuse Blast Polishing System
What is it?
A polishing function that allows you to clean and polish parts with plastic beads, giving you parts that are not only clean, but also smooth, scuff-resistant, and dye-ready with a professional semi-gloss finish.
Why it's important
Go beyond part cleaning and polish parts to a smooth, semi-gloss, and dye-ready surface finish to deliver customer-grade parts.
Cleaning Routines
What is it?
Pre-programmed routines for cleaning and polishing
How it works: Select a routine from the list
Most parts can be cleaned with the mode
is necessary to get rid of the strong Surface Armor with this material should be used for delicate parts that require a more gentle tumble Settings can also be adjusted for time, speed, pressure
Passive Media Seperation
What is it?
Filter separates out powder and debris from clean media
Why it's important
Extends media life x4-8 times by reducing media saturation
Enables faster processing on Fuse Sift
Manual Hand-Held Cleaning
What is it?
Versatile mode that allows you to manually clean a part
Allows you to direct the blasting gun with precision while holding the part with the other hand
Why it's important
Easily clean intricate features that require line of sight with precision
Specifications
Printer Compatibility
Fuse Series SLS 3D Printers. Third-party powder bed fusion 3D printers
Minimum Dimensions for Convenient Access (W × D × H)
145 × 150 × 175 cm; 57.4 × 59.6 × 69 in
Dimensions (W x D x H)
100 × 75 × 175 cm; 39 × 29.6 × 68.7 in; Height when open: 195cm (76.8 in)
Weight
164 kg (without blasting media); 360 lb (without blasting media)
Media Hopper Capacity
Media hopper capacity 8.3 L, equivalent to 13 kg of 200-300 µm glass media
Waste Hopper Capacity
10.6 L
Operating Environment
10–36 ºC; 50–96.8 ºF; Elevation up to 7500 ft / 2286 meters
Air Handling
Negatively pressurized hood with replaceable HEPA filter. Independent venting system
Power Requirements (with a vacuum that draws less than 6 A (230 VAC) / 12 A (120 VAC))
120 VAC, 6 A (no dedicated circuit or vacuum required)
Compressed Air Requirements
Supply at least 10 SCFM at 90 PSI / 285 SLPM at 6 bar. Regulate pressure input between 90-120 PSI / 6-8 bar. Typically achieved by a single 4 HP compressor.
Connectivity
Wi-Fi: 2.4 GHz; Ethernet: 1000; Mbit USB: 2.0
Sound Emission
Does not exceed 70 dB(A).
Tumbling Basket
450mm internal diameter (Fits a full Fuse build volume)
Internal work area (W x D x H)
71 x 55 x 67 cm; 27.9 x 21.6 x 26.3 in
Accessible work area (W x D x H)
57 x 50 x 67 cm; 22.4 x 19.6 x 26.4 in (basket removed)
Related Products
Formlabs Fuse Blast
$10,999.00
Get from printed to finished parts in as little as 15mn with Formlabs Fuse Blast, a fully automated post-processing solution for SLS parts that enables you to deliver consumer-grade parts while reducing labor and overhead costs.
Add to cart More InformationFormlabs Fuse Blast
$10,999.00
Get from printed to finished parts in as little as 15mn with Formlabs Fuse Blast, a fully automated post-processing solution for SLS parts that enables you to deliver consumer-grade parts while reducing labor and overhead costs.
Add to cart More InformationFormlabs Fuse Blast
$10,999.00
Get from printed to finished parts in as little as 15mn with Formlabs Fuse Blast, a fully automated post-processing solution for SLS parts that enables you to deliver consumer-grade parts while reducing labor and overhead costs.
Add to cart More InformationFormlabs Fuse Blast
$10,999.00
Get from printed to finished parts in as little as 15mn with Formlabs Fuse Blast, a fully automated post-processing solution for SLS parts that enables you to deliver consumer-grade parts while reducing labor and overhead costs.
Add to cart More Information