$1,423.80Original price was: $1,423.80.$1,356.00Current price is: $1,356.00.
The UltiMaker PET CF Expansion Kit includes everything you need to start printing high-performance parts on an UltiMaker S series printer so that you can get the full power of carbon fiber composite parts, combined with the seamless workflow and ease of use of the UltiMaker platform.
What's in the box:
2x spools of PET CF Black
1x spool of PET CF Blue
1x spool of PET CF Gray
1x CC 0.4 Print Core
1x CC 0.6 Print Core
Free Ultimaker Cura software with optimized
PET CF annealing slicing features
With a flexural strength of ~100 MPa and a stiffness of ~6000 MPa, UltiMaker PET CF provides excellent mechanical properties, suitable for a wide range of high-performance composite applications.
AVAILABLE IN MULTIPLE COLORS
UltiMaker PET CF comes in three colors: black, gray, and blue, all three of which are included in this kit.
ENHANCED PERFOMANCE THROUGH ANNEALING
Annealing your part results in a temperature resistance of 181 °C, a 30% increase in strength, and a 10% increase in stiffness.
PERFECTLY TUNED FOR ULTIMAKER S SERIES PRINTER
Complete integration of PET CF with S series printers: including NFC-equipped spools, intent profiles in UltiMaker Cura, and two sizes of CC Print Core, both of which are in this kit
LOW MOSITURE SENSITIVITY
Less moisture sensitive than other carbon fiber-based materials and when kept in an UltiMaker Material Station, it should remain dry.
COMPATIBLE WITH ULTIMAKER SUPPORT MATERIALS
Enjoy full geometric design freedom when printing PET CF in combination with PVA or Breakaway support materials.
Specifications
Filament diameter
2.85 mm
Colors
Black, gray, blue
Printer compatibility
All S series printers
Print core
CC 0.4 and CC 0.6
Support materials
PVA, Breakaway, and model support
Software
UltiMaker Cura 5.4 and up
Adhesion
Only for large prints, use 3DLAC Plus on S7. Use a thin layer of UHU on S3/S5.
Storage
In a resealable bag with desiccant between 0 and 30 °C and out of sunlight (or in Material Station)
Drying
70 °C for 4–16 hours dependent on moisture level
Annealing
Use annealing intent profile in Cura. Programmable industrial-grade convection oven recommended
Maintenance
Regularly clean print cores
Optimize Z-strength
Wall thickness min. 2 mm, preferred 4 mm or more
Avoid strong external air circulation (ventilation, air conditioning)
Set “Fan Speed” and “Maximum Fan Speed” to 0% or 5% (note: reduces dimensional accuracy somewhat).
If printing multiple models single extrusion: set Cura setting “Print Sequence” to “One at a time”
Tip: avoid issues by orienting the model such that the highest mechanical forces are applied to the XY plane
